Plywood Tuning Fork

Tuning forks are so named because they are used to help tune musical instruments, but they also have a variety of other uses. They are used by audiologists to test for certain kinds of hearing loss, by the police to calibrate the radar guns used to identify speeding vehicles, and by alternative healers as an (unproven) way of improving mental clarity and physical energy. They can also apparently be used by medics to detect a bone fracture in a pinch if no x-ray is available. The applications all rely on the fact that when a tuning fork is struck, that energy is converted into vibrational energy, and its tines oscillate at a particular frequency to produce a specific pitch of note.

This plywood tuning fork is one of a set of 16 made in 2009 by our Director Zoe Laughlin as part of her PhD research. Together these tuning forks investigate the acoustic properties of materials and demonstrate the physics of sound and vibration. Three principle factors influence the production of sound by a tuning fork: the shape of the fork, and the density and elastic modulus (a measure of stiffness) of the material from which the fork is made. Each of the set of tuning forks is the exact same shape, but is made from a different material (an array of metals, woods, plastics and glass). Playing these tuning forks allows us to directly compare how the density and elastic modulus of each material affects the sound the fork produces.

When these tuning forks are struck, the density and elastic modulus of the material determine how much energy is absorbed and how much is converted into vibrations and audible noise. These material properties will also affect how high or low the note that is produced is (pitch) as well as how long the tuning fork rings for (duration).

You would usually play a tuning fork by holding its stem and striking it on the hard heel of your hand, but, as with the spruce tuning fork, you can only get an audible note from this plywood fork by using the pinching technique. It doesn’t produce an audible ring like most of the metal and glass tuning forks. Instead this wooden fork produces a single note that doesn’t last very long at all, and there is a real knack to getting a sound from it. You need to hold the base of the fork firmly in one hand and bring it close to your ear, before pinching the two prongs together and releasing them quickly, so that they vibrate. When played in this fashion, the fleeting sound produced is lower in pitch than that of the spruce tuning fork and copper tuning fork. The plywood used to manufacture the tuning fork is a furniture grade plywood.

Read more about our sensoaesthetics research here.