Random Orbital Sanders
How to access this tool
Drop-in use
Drop into the workshop during our opening hours to use this tool, but ask a technician if you need any training first.
Key information
Green tools are our general-use tools. These have either been demonstrated or explained in your New Member Induction, or are safe for use after a demonstration by a technician. Always ask a member of staff before using any green tools for the first time, or if you are not sure how to use these safely.
A random orbital sander is a hand-held power tool which uses a disc that sands in constant irregular overlapping circles. The random orbit sanding pattern is produced by simultaneously spinning the sanding disk and moving it in small ellipses. This ensures that no single part of the abrasive material travels the same path twice during the same rotation. Because of this random sanding action, the tool does not leave swirl marks, and is not sensitive to the direction of wood grain.
Please note
Random Orbital Sanders should not be used to remove large sections of material.
This machine can only be used with woods (no green wood).
Ensure the sander is connected to an extraction system when in use.
What can I use this tool for?
Random orbital sanders are excellent for finishing projects and leaving a fine finish on work pieces.
Materials used with this tool
- Wood only - No green wood
What training do I need to use this tool?
Once you have completed a New Members Introduction, you can use this tool on a first-come-first-served basis.
If you would like advice on how to use it, come to the workshop during opening hours and work out a time to be shown with one of the technical staff.
Technical specifications
| Specification | Details |
|---|---|
| Sanding Disc Diameter | 150 mm |
| Sanding Stroke | 3 mm |
